Information Statement On The Removal Of Lead-Based Paint

Information Statement On The Removal Of Lead-Based Paint

Return to Start

Containment Action

A containment plan may need to address the following:

1. ensuring that fugitive emissions to the air and deposition of lead onto soil or into water are minimized;
   
   
2. providing for the collection of all waste streams generated (liquid, abrasive, dust, etc.) so that the handling and disposal of the waste is in strict compliance with environmental regulations;
   
   
3. minimizing the risks to workers inside the containment by developing a design which displays the engineering controls and structural integrity necessary to minimize health risks and to maximize visibility;
   
   
   
4. preventing public exposure to lead and deposition of lead particles onto public or private property;
   
   
5. ensuring a design that can withstand episodes of high winds or can be lowered quickly in the event of high winds;
   
   
6. considering the proximity of residential areas, schools, hospitals, or day care facilities;
   
   
7. considering the proximity of wetland areas and surface water bodies; and
   
   
8. considering the proximity of structures devoted to water supply or food processing activities.

The degree of containment and environmental controls needed will vary depending upon the site-specific conditions and the coating removal method that will be utilized. Dry abrasive blasting, although maybe the most effective paint removal method, is also the method which produces the greatest amount of dust and is the most difficult to contain. Water towers, due to their height and the increased air movement, present especially difficult containment challenges when conducting abrasive blasting. Whenever feasible, alternatives to dry abrasive blasting should be considered especially in residential areas or near school buildings and day care facilities where there is high potential for human exposure. Examples of some of the alternatives to dry abrasive blasting are such methods as vacuum blasting, hand tool cleaning, and cleaning with power tools with vacuum attachments. Methods which utilize high/low pressure washes or wet abrasive blasting decrease dust generation but present particular containment problems due to the requirement that all liquid waste must be contained and collected for proper disposal.

Environmental control measures, at a minimum, should include the use of impermeable groundcover. The groundcover should cover all bare soil and vegetated areas which may be impacted by removal activities. All surfaces should be thoroughly cleaned of all loose material daily and before the enclosure is moved.

Abrasive blasting should not be conducted when wind direction and velocity result in an ineffective containment; therefore, the containment plan should include a wind speed limitation that can be used to suspend operations.

Continue to Air Pollution Control | Return to Start